-
Metallographic Precision Flat Plate Cutting Machine
PBQ-5000Z
Send Email Details
PBQ-5000 metallographic precision flat plate cutting machine is suitable for cutting samples such as semiconductors, crystals, circuit boards, fasteners, metal materials, rocks and ceramics. The whole machine is smooth, spacious and generous, providing a good working platform. It adopts high-torque and high-power servo motors and stepless speed control systems, which are efficient and stable. Good visibility and cutting ability minimize the difficulty of operation and are easy to use. Moreover, the machine is equipped with a variety of different fixtures, which can cut irregular-shaped workpieces. It is a high-quality precision cutting machine suitable for scientific research institutions and enterprises. -
Metallographic Sample Cutting Machine
Q-2A
Send Email Details
Q-2A metallographic sample cutting machine uses a high-speed rotating thin-slice grinding wheel to cut metallographic samples. It is widely used in metallographic laboratories to cut various metal materials. Since this machine is equipped with a cooling device to take away the heat generated during cutting, it avoids the sample from being heated and changing its metallographic structure. -
Cutting Machine
Q-100B
Send Email Details
Q-100B metallographic sample cutting machine uses a high-speed rotating thin-slice grinding wheel to cut metallographic samples. It is widely used in metallographic laboratories to cut various metal materials. Since this machine is equipped with a cooling device to take away the heat generated during cutting, it avoids the sample from being heated and changing its metallographic structure. -
Precision Flatbed Cutting Machine
SYJ-200H
Send Email Details
SYJ-200H precision flatbed cutting machine is suitable for rough processing of various materials such as crystals, ceramics, glass, rocks and metallographic specimens. Diamond saw blades, electroplated diamond saw blades and resin saw blades can be used.
Installation conditions: This equipment is required to be used below 1000m above sea level, at a temperature of 25℃±15℃ and a humidity of 55%Rh±10%Rh.
1. Water: The equipment is equipped with a self-circulating water tank (filled with pure water or deionized water).
Note: Cooling water must be added during normal use of the equipment, otherwise the spindle will overheat and affect the service life of the sealing ring. The water tank should not be filled with too much water, and it is advisable not to exceed 5mm above the edge of the saw blade.
2. Electricity: AC 220V 50Hz, must be well grounded.
3. Gas: None
4. Workbench: size 500mm×400mm, load-bearing capacity of more than 100kg.
5. Ventilation device: required -
Automatic Metallographic Cutting Machine
WYL-80H
Send Email Details
WYL-80H is a floor-standing integrated precision manual and automatic metallographic cutting machine designed to meet the needs of precise positioning cutting and multiple positioning cutting. The cutting spindle is fixed to reduce the vibration during the motor transmission process and improve the finish of the cutting surface.
The control is full-button control. The cutting platform can be set with parameters to run automatically, or the platform can be manually controlled to move forward and backward by pushing and pulling the handle forward and backward. The platform is divided into two layers of movable precision positioning to meet the precision requirements of flattening thin slices of various irregular parts. The Y-axis automatic effective cutting stroke is 1-185MM, the cutting speed is 2840 rpm (selectable speed or speed regulation), and the X-axis manual adjustment stroke is 0-60MM, which is suitable for precision cutting and sampling of various material samples (cutting discs of different materials need to be selected according to the material). -
Intelligent Automatic Metallographic Cutting Machine
WYL-100B
Send Email Details
WYL-100B is a floor-standing integrated precision intelligent automatic metallographic cutting machine designed to meet the requirements of precise positioning cutting and multiple positioning cutting. It adopts a 10-inch ultra-large color touch screen and a PLC control system. The unique split double-layer movable precision positioning platform meets the precision requirements of flattening thin slices of various irregular parts. The feed stroke can be set arbitrarily, and the cutting speed can be infinitely adjusted from 1 to 100 mm/min, and can be adjusted online at any time according to the cutting situation; it is suitable for precision cutting and sampling of samples of various materials.